All equipment is CAD drawn and machined to a minimum tolerance of +/- .030.
Construction is primarily of Square Tubing 3″ x 11g, Rectangular Tubing 4″ x 2″ x 11g and Rectangular Tubing 3″ x 2″ x 11g and a combination of other heavy structural tubular steel sizes with an ASTM rating of A500 grade (minimum mechanical properties of 58,000 PSI tensile strength and 46,000 PSI yield strength).
Features all-welded construction by inert-gas MIG welding to conform with and in accordance with the following codes and/or standards: 3:1 AWS, A3.0 Welding Terms and Definitions 3.2 AWS D1.1-81 Structural Welding Code-Steel 3.2 AWS D9.1 Specifications
Each piece of equipment is prepared both mechanically and chemically for powder-coating. This process includes a high-temperature, high-pressure iron phosphate wash to ensure optimum adhesion of the electrostatically applied TGIC polyester powder. This is an engineered powder that is scuff resistant and long wearing. The coating is then baked at 400 degrees Far. and carefully monitored to ensure complete curing.
Technical summaries are determined using 3.0 – 5.0 mil powder film over iron-phosphated, pretreated steel using and conforming with the following test methods:
ASTM B5965-96, C
ASTM D 3451-93, 13
UL DTOV2 organic coatings
Padding and Upholstery:
The padding material is 2″ thick rebond foam meeting ASTM 1692 and MVSS302 standards for flammability. Foam density is 8 lbs. per cubic foot. Upholstery is 32 oz. Sulfide-stain resistant “Naugahyde” formulated to meet small scale flammability test requirements contained in Federal Standard 191A (CCC-A-680 a). All pads are top double-stitched. Foam is glued to a 3/4″ thick support board, then trimmed to fit exactly. Corners are radiused and edges are chamfered on both top and bottom to promote comfort and durability.
Input and movement arms rotate with either non-friction roller bearings with a Basic Radial Load Rating of 2420 pounds, contained in a custom cast and machined housing or a self-lubricating bronze bushing in a machined steel housing to provide smooth movement and precise alignment.
1/4″ diameter aircraft cable with a 7 x 19 construction and black nylon coating. the cable is rated at a breaking strength of 4200 lbs.
Pulleys are 4 1/2″ diameter fiberglass-impregnated nylon with a precision fit cable groove and 6203 double sealed non-friction roller bearings.
All Legend selectorized equipment features solid steel weight stack plates with a black finish. Self aligning low friction sleeve bearing surround the guide rods on every weight stack plate.
Heavy duty die cast springs are used under the weight stack to reduce shock and vibration stresses.
Guide rods are solid steel and hard chrome plated to ensure quiet operation and low friction movement.
All Legend selectorized equipment features weight stack pins that are lanyard with a coiled self-storing cord to prevent pin removal or loss.
All bolts meet ANSI B18.3 specifications.
45 durometer rubber handgrips are used for comfort, safety and durability.
LIMITED LIFETIME WARRANTY – Structural Welds and Frames
FIVE-YEAR WARRANTY – Bronze Bushings, Sealed Rotating Bearings and Pulley Wheels
ONE-YEAR WARRANTY – Cables, Weight Plates, Guide Rods, and all other components not mentioned elsewhere in this warranty.
NINETY-DAY WARRANTY – Upholstery and Grips
All warranty periods begin to run from the date of delivery to the original purchaser. The obligation of Legend under this warranty is limited to repairing or replacing warranted defective parts, as Legend may elect, at the Legend plant in Maynardville, Tennessee, without charge to purchaser for either parts or labor. Purchaser is responsible for all transportation and insurance costs on returned or replaced equipment to and from the Legend plant in Maynardville, Tennessee.
This limited warranty does not cover and no warranty is given with respect to:
1. Component parts not manufactured by Legend.
2. Products that are altered without the express, written consent of Legend.
3. Products purchased other than directly from Legend or through a Legend authorized dealer.
ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO ONE YEAR DURATION FROM THE DATE OF DELIVERY TO THE ORIGINAL PURCHASER. THE REMEDY OF REPAIR AND REPLACEMENT IS THE EXCLUSIVE AND SOLE REMEDY OF THE PURCHASER. LEGEND SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, DAMAGE OR LOSS OF OTHER PROPERTY OR EQUIPMENT AND LOST PROFITS OR REVENUE.
No action for breach of this written limited warranty or an implied warranty shall be commenced more than one year after the accrual of the cause of action. This written limited warranty is the complete, final and exclusive agreement of the parties with respect to the quality or performance of the goods and any and all warranties and representations. No modifications of this limited warranty or waiver of its terms shall be binding on either party unless approved in writing by an authorized corporate officer of Legend.
Tendo Sports Machines (Tendo), warrants this product to be free from defects in workmanship and materials, under normal use and service conditions, for a period of one (1) year from the date of purchase.
Tendo’s obligation under this warranty is limited to replacing the warranted parts. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by a Tendo authorized service center; No other warranty beyond that specifically set forth above is authorized by Tendo.
Tendo is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
A 20% restocking fee will be applied on all canceled orders in progress or returned items. Items returned by customer will bear all packaging and shipping responsibility.